technical support: (888) 41-astec or (407) 241-2752 americas: (760) 930-4600 europe (uk) 44 (1384) 842-211 asia (hk) 852-2437-9662 90 special features 47 watts LCT43-E series electrical specs rev 8.11.04 vde 0805/en60950 (iec950) 21310-3336-0003 ul ul1950 e186249 csa csa 22.2-234 -950-95-m90 cb certificate and report 6593 ce mark (lvd) ? totally enclosed ? universal input ? quick installation ? built-in emi filter ? low output ripple ? overvoltage protection ? overload protection operating temperature: 0 to 50c ambient; derate each output at 2.5% per degree from 50 to 70c electromagnetic susceptibility: designed to meet iec 1000-4, -2, -3, -4, -5, -6, 8, 11 level 3 humidity: operating; non-condensing 5% to 90% vibration: .41 g from 3 to 500 hz spectral break points of .0065 g2/hz at 10 hz and 200 hz and 5 db/octave roll off at each end, 2 hours per axis storage temperature: -40 to 85c temperature coefficient: .04% per c mtbf demonstrated: >300,000 hrs @ full load and 25c ambient conditions input input range 85-264 vac 120-300 vdc frequency 47-63 hz inrush current <20 a peak @ 115 vac; <40 a peak @ 230 vac, cold start @ 25c input current 1 a max. (rms) @ 115 vac efficiency 70% typical at full load emi filter fcc class b conducted and radiated cispr 22 class b conducted and radiated en55022 class b conducted and radiated bellcore gr-1089-core class b conducted safety ground leakage current <3.5 ma @ 50/60 hz, 264 vac input output maximum power 47 w with 12 cfm forced air cross regulation 2% on output 1; 5% on outputs 2, 3 hold-up time 10 ms @ 47 w load, 100 vac input overload protection short circuit protection on all outputs. case overload protected @ 110- 135% above peak rating overvoltage protection 5.50-6.75 vdc on main output environmental safety total power: 47 watts input voltage: 85-264 vac 120-300 vdc # of outputs: triple
asia units 2111-2116, level 21 tower1, metroplaza 223, hing fong road fwai fong, new territories hong kong telephone: 852-2437-9662 facsimile: 852-2402-4426 europe astec house, waterfront business park merry hill, dudley west midlands, dy5 1lx, uk telephone: 44 (1384) 842-211 facsimile: 44(1384) 843-355 americas 5810 van allen way carlsbad, ca 92008 telephone: 760-930-4600 facsimile: 760-930-0698 91 www.astecpower.com ordering information model output minimum maximum load with maximum load with peak regulation2 ripple number voltage load convection cooling 12 cfm forced air load1 p/p (pard)3 LCT43-E +5 v 1.0 a 4 a 7 a 8 a +4 / -2% 50 mv +12 v 0.1 a 1 a 1.2 a 1.5 a 5% 120 mv -12 v 0 a 0.5 a 0.5 a 0.6 a 5% 120 mv 1. peak current lasting <30 seconds with a maximum 10% duty cycle. 2. at 25c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 4. minimum loads are required. connector LCT43-E sk1-1 ac line sk1-2 ground sk1-3 ac neutral sk2-1 -12 v sk2-2 com sk2-3 +5 v sk2-4 +5 v sk2-5 com sk2-6 +12 v mating connectors ac input: iec 320 dc outputs: molex 15-48-0406 (usa) notes: 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is .02?. 3. specifications are for convection rating at factory settings at 115 vac input, 25c unless otherwise stated. 4. warranty: 1 year 5. weight: 1.25 lb. / 0.57 kg pin assignments LCT43-E series
|
